Rickenbacker cases have always come in two styles: cool or useful. The vintage cases of silver tolex and black leather were unmistakable in their appearance -- but their open interior was not the best option for protecting a valuable guitar. The new molded cases offer better protection -- but the plastic shell doesn't offer much in the way of looks.
You don't have to choose anymore. We're proud to offer the ultimate case for your short-scale Rickenbacker: vintage appearance with modern protection. You get the same appointments as the vintage case: silver tolex, leather endcaps and handle, white piping, nickel hardware. The inside is lined with a blue plush lining reminiscent of the vintage case (but without the smell). You get the same front gear pocket. But best of all -- and this is what makes the case -- the padding is form-fitted to your guitar. This is no glorified rattle box or token wrapping: this is custom-cut, form-fitted foam that holds your guitar so it does not move. Upper bout, waist, lower bout; the padding hugs it everywhere. There's even a long pad under the neck to support it all the way from the body to the headstock.
Why put your guitar in just any case? Why settle for something you don't want? There's a better case out there -- and that case is right here. Buy it.
PLEASE NOTE: We have yet to find a short-scale Rickenbacker that does not fit this case. However (and READ THIS CAREFULLY), we do not have a comprehensive collection of every model or all the permutations of the 325 and the changes thereto over the years. As such, you are assuming some risk with your purchase. Specifically, we will accept a return if you can provably show your guitar doesn't fit, but you will be responsible for all shipping costs both ways.
Ultimate case for Rickenbacker 325, 900, etc.
If you have trouble getting the guitar into the case, try this: Put the case on a stable surface (like the floor). Instead of putting the treble side all the way into the cavity (resting on the bottom), put it in with the top of the padding about halfway up the side of the guitar. Then, push back and down on the upper bout with the heel of your hand (you'll have to push fairly hard). This will get the bass side into the cavity. At that point, push the entire guitar down flat. This may sound a bit complicated, but you only have to do it once or twice. After you get the guitar in, the padding will conform to the guitar and subsequent insertions get much easier. After you do this a few times, the guitar should go in with only minimal pressure (put the treble side in all the way and push back and down with your thumbs about 6" apart on the upper bout). This is exactly what you want, and this is how it was designed. If the guitar slipped right in initially, the padding would be loose enough that the guitar would move around. That defeats the purpose of having a true form-fitted case. And so, you have to go through this ritual of breaking the case in at the beginning.